Cooling CCD Camera and Imaging Systems

Product Details
Customization: Available
Type: Monitoring System
Application: All-Round Monitoring, Sentinel Surveillance, Sound Monitoring
Manufacturer/Factory & Trading Company
Gold Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
24
Year of Establishment
2013-03-26
  • Cooling CCD Camera and Imaging Systems
  • Cooling CCD Camera and Imaging Systems
Find Similar Products
  • Overview
  • Product Description
  • Certifications
  • Application
  • Packaging & Shipping
  • FAQ
Overview

Basic Info.

Model NO.
LM-OL500
Video Capture System
Camera Lens
Video Transmission System
Optical Fiber Transmission
Software Function
Monitoring
Software Usage
Vehicle Monitoring Software, Computer Monitoring Software, Mobile Phone Monitoring Software
Client Software
Client Software
Model
Smaller Models
Sensor
CCD
Kind
Autofocus Lens
Technology
Pan / Tilt / Zoom
Horizontal Resolution
1920*1080
Transport Package
Wooden Box / Pallet
Specification
Stainless Steel Material
Trademark
LM
Origin
China
HS Code
9031809090
Production Capacity
5000 Sets / Per Year

Product Description

Product Description

Product name: Clinker Cooler Monitoring Camera System

Product model: LM-OL500

Product Introduction:

1. Furnace Handle,it applies to all kinds of high temperature furnaces.
2. It applies to the furnace that the thickness of furnace wall is around 500mm.
3. Probe hood is made of stainless steel,with good corrosion resistance.
4. Special spiral air curtain,the lens does not gather dust.
5. Special air and water cooling ,the device can be used in all kinds of bad conditions normally.
6. Sapphire heat resisting lens.
7. Probe hood entry and exit automatically.
8. Use heat resisting cylinder,with good reliability.
9. Probe hood will exit automatically if there is any accident on power or water/air cooling.
10. Central control room or project site can control the equipment to entry or exit.
11. PLC procedural control,DCS software control camera menu and aperture.
12. Use the 500 mm high temperature optical pinhole lens.
13. Use 27 x optical zoom (electronic zoom3.6-78 ) integrated camera.

Main Function Probe Will Exit:
1. Temperature of the hood rises above 50°C (specified levels).
2. Compressed air input air pressure below 0.3 MPa.
3. Probe hood cooling water input flow is less than 0.2M³/h.
4. Power is cut off.
5. Control room or control device of project site send out exit signal.
6. Alarm signal can be connected to the DCS.
 
Technical  Parameters:
1. Resolution: 1920*1080
2. Zoom: (electronic zoom3.6-78 ) 27 x optical zoom
3. Exit distance: 550mm
4. Angle of view: 17°-81° focus or zoom
5. Lens aperture: electric remote control or manual control
6. Signal Noise Ratio: 56db
7. Colour filter device: can choose red, yellow to filter or panchromatic filtration

Compressed Air:
1. Total intake pipe: G1"
2. Connecting pipe: 4-G1/2"
3. Inlet pressure: 0.3~0.7MPa 
4. Inlet temperature: ≤35°C
5. Minimum flow: 0.3M³/min

Cooling Water:
1. Total intake pipe: G3/4" 
2. Connecting pipe: 2-G1/2" 
3. Inlet pressure: 0.2~0.5MPa 
4. Minimum flow: 0.8M³/h 
5. Inlet temperature: ≤35°C

Working Condition Temperature:
1. Automatically exit device: -20°C~100°C
2. Control device: -5°C~75°C
3. Furnace temperature: <=1700°C

Dimension:
1. Handle exit device: 1000*400*305mm
2. Control box: 400*500*250mm(W*H*T).
3. Manipulator (there are three type, if you need to order it please specify).
3-1  Software operation (see figure). 
3-2  Flush mounting (see figure).
3-3  Cabinet mounting or place on the operating desk (see figure).
4. Installation diagram: (see figure ).
5. Open pore requirement (see figure).
Certifications


Cooling CCD Camera and Imaging Systems

Application


Cooling CCD Camera and Imaging Systems

Packaging & Shipping

Package: Standard export package(Carton box or Wood box)
MOQ: 1 Set
Loading Port: Shanghai,China 
Delivery Time: 15~25 working days

Cooling CCD Camera and Imaging SystemsCooling CCD Camera and Imaging Systems

FAQ

Q1: Are you a trading company or a manufacturer?
A1: We are manufacturers, but we can export for ourselves.
 
 
Q2: About the quotation?
A2: Please provide product model and order quantity to us , then we will send the proposal to you asap .
 
Q3: About Terms of payment?
A3: L/C,T/T,D/A,D/P,Money Gram,Western Union,Paypal.
 
Q4: About the advantage?
A4: Whether price or leadtime, we have absolute advantage, the quality is also to withstand the market and the inspection of major brands.

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier